Product description: ClimateCooler Catalyst Facadepaint SREP

ClimateCooler SREP Catalyst Facadepaint

Satin mat weatherproof silicone emulsion façade paint which offers an
excellent covering of the surface and lets it breathe. CC SREP Catalyst has
built in solar reflectance and photocalytic effect, UV stable additives and
nanosilanes. The painted surface offers photocatalytic, reflectant properties.
It reflects up to 80% of the UV and IR radiation, which gives a reduction
in surface temperature of 20-25°C. The photocatalytic effect means it
converts NOx into NO3, which contributes to reduce air pollution.
To get the best result it must be used on mineral surfaces such as: concrete,
sustainable silicate and plastered facades, this is also a fact for already
painted surfaces. The unique composition of CC SREP Catalyst façade paint
helps the surface to keep clean even in cities and industrial areas which
sometimes are polluted by acid gases, such as SO2 (sulphur dioxide).

Use

The surface must be clean, dry and sustainable. Growths must be removed
using Iso A-Clean ( see instructions for use) Newly casted concret and
plastered surfaces are not to be treated before the following year. Facades
made of tiles or lime stone must be frost-resistant, free of moisture and efflorescence.
Very absorbent surfaces requires a treatment of SREP Primer
prior to the application of CC SREP Catalyst facadepaint. The application
goes in two steps:

1) CC SREP Catalyst diluted with 5% water
2) CC SREP Catalyst undiluted.

Recommendation: Always make a test coat to ensure the compatability of
product and surface.

Technical data

Composition: Waterbased polysiloxane, solar reflecting, photocatalytic
pigments and UV stabilizers.
Colours: pale slate grey, Antrazit grey, mansion
yellow, creamy white, white ( can be mixed to a large colour range)
Density: approx. 1,5 g/ml
Dry content: 50 w/w% and 35 w/v%
Gloss: Satin mat 2-5 Spreading rate: Approx. 5-6 m²/l
Dilution: Max 5% water
Drying time: 1-2 hours by 20°C and 60% RH.
Repaintable: 12 hours Application
Conditions: The temperature must be 5°C - 30 °C and max. 80% RH.
Application method: Brush, roller or spray.
Water permeability: sdvalue(m) 0,073 (DIN52615).
Capillary water permeability: w 24 value 0,078 kg/m²√h (EN-1062-3).
Cleaning: Water.
VOC: max. 40 g/l (Cat. A/c)
Storage: Cool, but free of frost in closed containers and out the reach of
children.