ClimateCooler Catalyst Silicone Facade Paint
Product description:

Satin mat weatherproof silicone emulsion façade paint which offers an ex­cellent covering of the surface and lets it breathe. CCC Silicone Facadepaint has built in solar reflectance and photocalytic effect, UV stable additives and nanosilanes. The painted surface offers photocatalytic, reflectant properties. It reflects up to 80% of the UV and IR radiation, which gives a re­duction in surface temperature of 20-25°C. The photocatalytic effect means it converts NOx into NO3, which contributes to reduce air pollution.

To get the best result it must be used on mineral surfaces such as: concrete, sustainable silicate and plastered facades, this is also a fact for already painted surfaces. The unique composition of CCC Silicone façade paint helps the surface to keep clean even in cities and industrial areas which sometimes are polluted by acid gases, such as SO2 (sulphur dioxide).

Use:

The surface must be clean, dry and sustainable. Growths must be removed using Iso A-Clean ( see instructions for use) Newly casted concret and plastered surfaces are not to be treated before the following year. Facades made of tiles or lime stone must be frost-resistant, free of moisture and ef­florescence. Very absorbent surfaces requires a treatment of SREP Primer prior to the application of CCC Silicone facadepaint. The application goes in two steps:

1) CCC Silicone Facadepaint diluted with 5% water

2) CCC Silicone Facadepaint undiluted.

Recommendation: Always make a test coat to ensure the compatability of product and surface.

Technical data:

Composition: Waterbased polysiloxane, solar reflecting, photocatalytic
pigments and UV stabilizers.
Colours: pale slate grey, Antrazit grey, mansion
yellow, creamy white, white ( can be mixed to a large colour range)
Density: approx. 1,5 g/ml
Dry content: 50 w/w% and 35 w/v%
Gloss: Satin mat 2-5 Spreading rate: Approx. 5-6 m²/l
Dilution: Max 5% water
Drying time: 1-2 hours by 20°C and 60% RH.
Repaintable: 12 hours Application
Conditions: The temperature must be 5°C - 30 °C and max. 80% RH.
Application method: Brush, roller or spray.
Water permeability: sdvalue(m) 0,073 (DIN52615).
Capillary water permeability: w 24 value 0,078 kg/m²√h (EN-1062-3).
Cleaning: Water.
VOC: max. 40 g/l (Cat. A/c)
Storage: Cool, but free of frost in closed containers and out the reach of
children.