Roof Coating Energy Saver Impregnations Facade Paints Contact

HB 80 Finish

Isonit - Iso Paint Nordic 

Product description:
HB 80 Finish is a water dilutable roof coating based on acrylic dispersions.

Product properties and use:
HB 80 Finish is used on concrete roof tiles where a full glossy look is demanded.
The coating is lightfastness and weather-stable. It has good adhesion abilities and creates a good strong water-repellent surface.

Not usable on clay tiles and natural slate.

Technical data

Composition:
Water dilutable coating based on acrylic dispersions.

Colours:
Standard colours: Black, anthracite grey dark, slate grey, anthracite grey, light grey, black blue, royal blue, forest green, bordeaux, dark brown, mocca, red brown, oxide red, tile red R-728, tile red and Swedish red.
Other colours are available on demand.
Black and anthracite grey are stock items.

Packaging sizes:
20 l

Density:
1,04 – 1,06 kg/l depending on colour

Viscosity:
4.000 – 5.500 cPs

Dry content:
Approx. 54 weight %, approx. 51 vol. %

Gloss:
80 at 60°

Spreading rate:
3,3 – 6,5 m2/l

 

  Theoretical spreading rate 

 Recommended layer thickness, 1. layer 

Wet 

Dry 

6,5 m2/l

150 µm

75 µm

  Recommended layer thickness, when 2 layers 

3,3 m2/l

400 µm

170 µm 

The practical spreading rate depends on application method, form and surface of the material.

Pre-treatment/cleaning:
The roof must be cleaned thoroughly using high-pressure and Iso A-Clean.
Always prime with “TG 80 Start” to ensure good adhesion.
The surface must be clean, dry, and sustainable.

Stirring:
The coating must be stirred before use

Dilution:
To be used undiluted

Application temperature:
The temperature must be between 8° C and 30° C, and
Application method:
Brush, roller, or airless, nozzles 19 – 21. 180 – 220 bar
To ensure the right layer thickness, apply the paint in two layers, each with a layer thickness of 150 µm.

Always make a test coat to ensure the compatibility of product and surface.

It is recommended to maintain coated roofs with a treatment with Iso A-Clean every second year – in order to keep the surface nice and clean.

Drying time:
Laboratory tests

 Wet layer thickness 200 µm 

 20 °C / 65 % RH 

Touch dry

1 hour

Recoatable

2 hours

Fully cured

24 hours 

The drying and times for recoating depend on layer thickness, temperature, relative air humidity, and air circulation.

Cleaning of equipment:
Water and soap

Storage:
Cool, protected from frost, in tightly closed packaging, and out of reach of children

Environment:
No spillage into drains, to be disposed of at the local recycling centre

VOC: Max. 40 g/l (Kat. A/c)

HB 80 Finish

 

Iso Paint Nordic A/S (Tikkurila Danmark A/S) · Tværvej 8 · 6640 Lunderskov · Denmark · © Copyright Iso Paint Nordic 2014
SUPPORT · Telefon +45 76 33 31 14 · Mail: mail.isopaint@tikkurila.com