Product description: ISO EPDM/TPO Cleaner

ISO EPDM/TPO Cleaner

Preparation

Cleaner to be used in the treatment of EPDM or TPO.

Application

For exterior use only. Protective clothing eyewear should be used
during application of this product. The surface must be free of loose
dirt and growths. Apply the cleaner using a low pressure spray, roller
or brush. Cover the entire surface starting at the highest point to
make the residue of material run down to cover the uncleaned part
of the roof. Do not allow residue to get on already cleaned surface as
it will be necessary to clean it again. After applying the clean allow it
to work for 15-20 minutes, then start power washing the surface in a
cross hatch pattern. After cleaning wash with water and make sure
no residues are left.
Recommendation: Always make a test to ensure the compatability
of product and surface.

Technical data

Composition: Liquid aqueous cleaning detergent.
Density: 1,02 g/ml
pH: Approx. 11,7
Dilution: Ready for use
Application conditions: The temperature must be 5°C - 35 °C
Application method: Low pressure spray, roller or brush
Cleaning: Water
Storage: Cool, but free of frost in closed containers and out the reach of children