Iso Hypercleaner
Product description:

Cleaner to be used prior to treatment with Iso Hypercoat.

Use:

For exterior use only. Protective clothing eyewear should be used during application
of this product. The surface must be free of loose dirt and growths.
Apply Iso Hyper Cleaner using a low pressure spray, roller or brush. Cover the
entire surface starting at the highest point to make the residue of material
run down to cover the uncleaned part of the roof. Do not allow residue to get
on already cleaned surface as it will be necessary to clean it again.

After applying Hyper Clean allow it to work for 15-20 minutes, then start
power washing the surface in a cross hatch pattern. After cleaning wash with
water and make sure no residues are left to interfere with Iso Hypercoat and
when dry you can apply Iso Hypercoat.

Technical data:

Composition: Liquid aqueous cleaning detergent.
Density: 1,02 g/ml
pH: approx. 11,7
Dilution: Ready for use.
Application conditions: The temperature must be 5°C - 35 °C.
Application method: Low pressure spray, roller or brush.
Cleaning: Water
Storage: Cool, but free of frost in closed containers and out the reach of children.