About Roof Coating Impregnations Facade Paints Contact

Metal Primer WB

Metal

Product description:
Metal Primer WB is a water-based primer protecting against corrosion

Product properties and use:
Metal Primer WB is suitable for steel plates and pre-painted steel façade plates (for instance plastisol-covered) that need refreshment. Furthermore, the product is of course suitable for all kinds of steel in general – indoors as well as outdoors.
Metal Primer WB is to be coated with Isonit Roof Coating (all types and glosses)


Technical data

Composition:
Water-dilutable primer based on acrylic dispersions

Colours:
Light grey and oxide red

Packaging sizes:
20 l

Density:
Approx. 1,25 kg/l

Dry content:
Approx. 49 weight %, approx. 37 vol. %

Gloss:
5 at 60°

Spreading rate:
8 m2/l

 

  Theoretical spreading rate 

 Recommended layer thickness 

Wet 

Dry 

8,0 m2/l

120 µm

45 µm

The practical spreading rate depends on application method, form and surface of the material.

Pre-treatment/cleaning:
Before applying Metal Primer WB, the surface must be cleaned thoroughly using high-pressure in order to remove all dirt, grease and loose rust and paint. If rusty areas are found after the cleaning, treat with RustConverter according to description.

Stirring:
The primer must be stirred before use.

Dilution:
Normally, to be used undiluted. May be diluted with max. 5 % water.

Application temperature:
The temperature must be between 8° C and 30° C and 85 % RH.

Application method:
Brush, roller, or airless, nozzle sizes 19-21, 180-220 bar
Always make a test coat to ensure the compatibility of product and surface.

Drying time:
Laboratory tests

 Wet layer thickness 120 µm 

 20 °C / 65 % RH 

Touch dry

1 hour

Recoatable

2 hours

Fully cured

24 hours 

The drying and times for recoating depend on layer thickness, temperature, relative air humidity, and air circulation.

Cleaning of equipment:
Water and soap

Storage:
Cool, protected from frost, in tightly closed packaging, and out of reach of children

Environment:
No spillage into drains, to be disposed of at the local recycling centre

VOC: Max. 30 g/l (Kat. A/h)

ISO Metal Primer

 

Iso Paint Nordic A/S (Tikkurila Danmark A/S) · Tværvej 8 · 6640 Lunderskov · Denmark · © Copyright Iso Paint Nordic 2014
SUPPORT · Telefon +45 76 33 31 14 · Mail: mail.isopaint@tikkurila.com