Rubber Roof Coating
Product description:

Rubber roof Coating is a unique high build coating designed specifically for the treatment of very damaged or leaky roofs.

It dries to be a thick rubbery coat, and can be applied in a very thick layer onto materials such as: Fibercement, concrete, tiles, plaster, roofing felts, steel, wood etc.

Furthermore it contains agents against growth of fungi, algae and lichens together with UV-absorbants.

The elasticity of this product even at-20°Cis up to 700%.

Use and application:

Rubber Roof Coating must be applied to a clean and dry surface. It is important to apply plenty of paint especially on very poor or leaky surfaces. Very poor surfaces might benefit from establishing a net down into the paint and afterwards paint 1-2 times again. Remember the first layer must be dry before applying the second. In closed attics with bad or no ventilation it is recommended to ensure ventilation for every 30-40 m².

The best result for applying Rubber Roof Coating is by spraying.

Recommendation: Always make a test coat to ensure the compatability of product and surface.

Technical data:

Composition: Special Polymer, UV stable pigments and agents for preservation. 
Colours: Black, Antracite grey, pale grey, marron, mocha, tile red, aluminum. 
Density:approx.  1,3 g/ml 
Dry content: appr. 65w/w% and 50 w/v% 
Gloss: 5-10 
Spreading rate: appr. 3 m²/l (depending on thickness) 
Dilution: max. 20  % water 
Drying time: 1-2 hours by20°C and 60% RH. (depending on thickness) 
Repaintable: 12-24 hours (depending on thickness) 
Application conditions: The temperature must be5°C -30 °C and max. 80% RH. 
Application method: brush, roller or airless spray. 
Cleaning: water 
VOC: max. 40 g/l (Cat. A/c) 
Storage: Cool, but free of frost in closed containers and out the reach of children.