Product description: SREP Primer

SREP Primer

Unpigmented primer with excellent penetration.
SREP Primer is hydrofobic and enhance the substrate. It is used before
treatment with ISO SiliconeFaçade Paint.

Use

The surface should be clean, dry and sustainable. Remove growths of
fungi, moss and algae with ISO A-Clean. See the instructions for use.
Depending on how porous the surface is it may be necessary to prime
one or two times and preferably wet on wet.. To obtain the best result
paint with Iso Silcine Façade Paint within 24 hours prior to the curing
of SREP primer.

Technical data:

Emulsion: Water-dilutable , solvent-free emulsion based on siloxane.
Density: 1 g/cm3.
Tools: Brush, roller and spray.
Cleaning: Water and soap. Spreading
capacity: 4-5 m2/l depending on the surface.
Drying time: 4-6 hours at 23ºC and 60% RH. Application: Min. +50ºC, max. 80% RH.
Storage: Dry, cool and frost-free without direct sunlight.
VOC: Max 30g/l (Cat A/g)

Note:
Do not apply in direct sunlight. Primed surface must not be glossy after drying.