Roof Coating Energy Saver Impregnations Facade Paints Contact

TG 80 Start 

Isonit - Iso Paint Nordic 

Product description:
TG 80 Start is a water-based primer.

Product properties and use:
TG 80 Start is a primer to be used before applying HB 80 Finish.
The primer is used on fibre cement and concrete tiles to ensure good adhesion.

Technical data

Composition:
Acrylic dispersions

Colours:
Standard colours: Black, anthracite grey dark, slate grey, anthracite grey, light grey, black blue, royal blue, forest green, bordeaux, dark brown, mocca, red brown, oxide red, tile red R-728, tile red and Swedish red.
Other colours are available on demand.
Black and anthracite grey are stock items.

Packaging sizes:
20 l

Density:
1,1 kg/l depending on colour

Dry content:
Approx. 44 weight %, approx. 33 vol. %

Gloss:
10 at 60°

Spreading rate:
6 - 7 m2/l

 

  Theoretical spreading rate 

 Recommended layer thickness, each layer 

Wet 

Dry 

6,5 m2/l

150 µm

60 µm

The practical spreading rate depends on application method, form and surface of the material.


Pre-treatment/cleaning:
Clean the roof thoroughly using high-pressure and Iso A-Clean before applying TG 80 Start. The surface must be clean, dry, and sustainable.

Stirring:
The primer must be stirred before use.

Dilution:
To be diluted with max. 10 % water

Application temperature:
The temperature must be between 8° C and 30° C and 85 % RH.

Application method:
Brush, roller or airless, nozzle sizes 19-21, 180-220 bar

The primer is applied in one procedure.

Always make a test coat to ensure the compatibility of product and surface.

Drying time:
Laboratory tests

 Wet layer thickness 200 µm 

 20 °C / 65 % RH 

Touch dry

1 hour

Recoatable

2 hours

Fully cured

24 hours

The drying and times for recoating depend on layer thickness, temperature, relative air humidity, and air circulation.

Cleaning of equipment:
Water and soap

Storage:
Cool, protected from frost, in tightly closed packaging, and out of reach of children

Environment:
No spillage into drains, to be disposed of at the local recycling centre

VOC: Max. 40 g/l (Kat. A/c)

 

TG 80 Start Primer

TG 80 Start

 

 

 

Iso Paint Nordic A/S (Tikkurila Danmark A/S) · Tværvej 8 · 6640 Lunderskov · Denmark · © Copyright Iso Paint Nordic 2014
SUPPORT · Telefon +45 76 33 31 14 · Mail: mail.isopaint@tikkurila.com