Iso Roof Membrane
Product description:

Iso Roof Membrane is a specially designed waterproofing membrane, which dries to a rubbery texture. Used where the surface is in very bad condition or even leaky. It can be applied to almost any surface such as: Fibercement, concrete, roofing felt, plaster, tin roofs and others. The elasticity is present even at -20°C.

Use:

Iso Roof Membrane is applied with brush, roller or spray. It is important to apply enough material, especially when the roof is in bad condition or leaking. On very bad surfaces you can benefit from laying down a net into the first layer of material and then apply a second layer when the first has dried. It is important to make sure the first layer is dry before applying the next.

The best result is obtained by spraying.

Recommendation: Always make a test coat to ensure the compatability of product and surface.

Technical data:

Composition: Special designed elastic polymers, weatherfast pigments and preservation Colours: Black, anthracite, pale grey, tilered, marron, mocha and aluminium grey. Density:  approx. 1,3 g/ml Dry content: Appr. 70 w/w% and 53 w/v% Gloss: 10-20 Spreading rate: Approx. 1-2 m²/l Dilution: Water if necessary Drying time: 12-24 hours by 20°C and 60% RH, depending on thickness. Application conditions: The temperature must be 5°C - 30 °C and max. 80% RH. Application method: Brush, roller, spray or spatula. Cleaning: Water VOC: Max. 40 g/l (Cat. A/c) Storage: Cool, but free of frost in closed containers and out the reach of children.