Product description:

Climate Cooler Facade SREP

Satin mat weatherproof silicone emulsion façade paint which offers an
excellent covering of the surface and lets it breathe. SREP CC has built
in unique solar reflectant, heat stable pigments, UV stable additives and
nanosilanes which offer a selfcleaning effect. The painted surface also offers
unique reflectant properties, it reflects up to 80% of the UV and IR radiation
this means a reduction of 20-25 °C in the surface temperature. To get the
best result it must be used on mineral surfaces such as: concrete, sustainable
silicate and plastered facades, this is also a fact for already painted
surfaces. The unique water and dirt repellent composition of Iso SREP CC
façade paint provides the paint to keep clean even in cities and industrial
areas which sometimes are polluted by acid gases, such as
sulphur dioxide.

Use

The surface must be clean, dry and sustainable. Growths must be removed
using Iso A-Clean ( see instructions for use) Newly casted concret and
plastered surfaces are not to be treated before the following year. Facades
made of tiles or lime stone must be frost-resistant, free of moisture and efflorescence.
Very absorbent surfaces requires a treatment of SREP Primer
prior to the application of Iso SREP CC facadepaint. The application goes in
two steps:
              1) SREP CC diluted with 5% water
              2) SREP CC undiluted.

Please note that SREP CC must not be applied in direct sunlight and is
not suited for flexible surfaces.

Recommendation: Always make a test coat to ensure the compatability of
product and surface.

Technical data

Composition: Waterbased polysiloxane, solar reflecting, heat stable pigments
and UV stabilizers.
Colours: Pale slate grey, Antrazit grey, mansion
yellow, creamy white, white ( can be mixed to a large colour range)
Density: Approx. 1,5 g/ml Dry content: 50 w/w% and 35 w/v%
Gloss: Satin mat 2-5
Spreading rate: Approx. 5-6 m²/l
Dilution: Max 5% water Drying
time: 1-2 hours by 20°C and 60% RH.
Repaintable: 12 hours Application
Conditions: The temperature must be 5°C - 30 °C and max. 80% RH. Application
method: Brush, roller or spray
Water permeability: Sd-value(m) 0,073 (DIN52615)
Capillary water permeability: W 24 value 0,078 kg/m²√h (EN-1062-3)
Cleaning: Water
VOC: Max. 40 g/l (Cat. A/c)
Storage: Cool, but
free of frost in closed containers and out the reach of children.