Description:
ISO Metal Primer WB is a water-dilutable and corrosion
inhibiting primer based on modified alkyd resin,
which has been specially developed for this purpose.
This product also contains corrosion inhibiting
pigments on a zinc-phosphate basis, plus opaque
pigments.
Properties:
ISO Metal Primer WB has the following properties,
amongst others, due to its unique composition:
- Good adhesion on steel, pre-coated steel plates,
etc.
- Effective corrosion protection.
- Fast drying.
- Water resistance is already achieved after
approx. 4 hours drying at 20° C.
- Can be painted over with water-dilutable paints
such as ISONIT roof paints (all types and degrees
of gloss).
Application:
ISO Metal Primer WB can be applied to steel plates
and pre-coated facade slabs, such as, for example
on PVC or polyester coated steel in need of a colour
refresh.
In addition, the product can also be used to prime
steel – both for the indoors and the outdoors
area.
Before applying the ISO Metal Primer WB, the base
must be cleaned thoroughly with a high-pressure
cleaner so that all dirt, grease, loose rust particles
and paint are removed.
Technical
Data:
Type: Water dilutable modified
alkyd.
Colour: Light grey and oxide
red.
Diluting: With max. 5% water,
if necessary
Coverage: 8-12 m² / per
litre.
Tools: Brush, Roller or Spray
gun.
Coat thickness: Recommended:
wet film 100 mym – dry film 40 mym.
Gloss: Approx. Gloss 5 - matt.
Content of non-volatile matter:
Approx. 1.3 kg per litre.
Drying time: Dust dry after approx.
1 hour at 20° C. Next coat of paint can be
applied after approx. 1-2 hours at 20° C.
The lowest application and hardening temperature
lies at +10° C.
Storage: Dry and cool, but frost-protected.
Store out of the reach of children
WHC: 1
|
|
