Description:
ISO Rubber Roof coating is a particularly elastic
paint which has a solid and rubber-like consistency
after drying. It can also be used for heavily weathered
and leaking roofs. The particular properties of
this roof paint allow application on various surfaces
such as Eternit, concrete, roofing paper, tiles
and bricks, wood, render, sheet metal, etc.
ISO Rubber Roof coating reduces moss and algae growth
and contains a UV filter. With an elasticity of
500-700%, ISO Rubber is very elastic. This property
is guaranteed to -20°C.
Application:
The roof must be carefully cleaned of dirt, algae
and moss. ISO Rubber roof coating can be applied
with a brush, roller or spray gun. You will achieve
best results with the spray gun.
Please note that the paint must be applied generously,
in particular when the roof is leaky or heavily
weathered.
If treating heavily weathered surfaces, a reinforcing
net can be placed in the paint. Then the paint is
applied again 1-2 times. Each coat has to dry thoroughly
before the next coat can be applied.
Ventilation in the roof is recommended per 30-35
m².
Technical
Data:
Colour: Black, charcoal grey, light
grey, brick red, reddish brown, mocha and aluminium
grey
Diluting: With water, if necessary.
Coverage: On absorbing surfaces
3 m² per litre.
Tools: Brush, Roller or Spray gun.
Gloss: Approx. 10.
Content of non-volatile matter:
Approx. 65%.
Drying time: Approx. 1 hour at
20° C, dependent on applied quantity, temperature
and relative humidity.
Follow-on treatment: The 2nd coat
can be applied after 1-2 days, when the 1st coat
is 100% dry.
Cleaning: Brush, Spray gun, etc. can be
cleaned with water.
WHC: 1
|
|
