About Roof Coating Impregnations Facade Paints Contact

RustConverter

Metal

Product description:
RustConverter is based on water-dilutable acrylic dispersions and tannin.

Product properties and use:
RustConverter is a primer to be used directly on rusty surfaces of iron and iron alloys. RustConverter chemically connects with rust and creates a black, stable surface more resistant to moisture. It protects the surface against further corrosion.

RustConverter must be coated subsequently.


Technical data

Composition:
Acrylic dispersions

Colours:
Colourless

Packaging sizes:
5 l and 25 l

Density:
1 kg/l

Dry content:
Approx. 44 weight %, approx. 44 vol. %

Gloss:
-

Spreading rate:
10 m2/l

 

  Theoretical spreading rate 

 Recommended layer thickness, each layer 

Wet 

Dry 

10,0 m2/l

100 µm

100 µm

The practical spreading rate depends on application method, form and surface of the material.

Pre-treatment/cleaning:
Remove all loose rust with a stiff brush, hammer or the like, and clean the surface from grease and other contamination, preferably using high-pressure and Iso A-Clean.

Stirring:
The primer must be stirred before use.

Dilution:
Always to be used undiluted

Application temperature:
The temperature must be between 8° C and 30° C and 85 % RH.

Application method:
Brush, roller, or airless, nozzle sizes 19-21, 180-200 bar

Often, one treatment will suffice, but sometimes several layers are necessary to ensure that the area is totally covered.

Always make a test coat to ensure the compatibility of product and surface.

RustConverter must be coated with Metal Primer WB, Isoxyde, or Metal OneCoat to obtain corrosion protection.

Drying time:
Laboratory tests

 Wet layer thickness 100 µm 

 20 °C / 65 % RH 

Touch dry

30 minutes

Recoatable

4 hours

Fully cured

24 hours 

The drying and times for recoating depend on layer thickness, temperature, relative air humidity, and air circulation.

Cleaning of equipment:
Water and soap

Storage:
Cool, protected from frost, in tightly closed packaging, and out of reach of children

Environment:
No spillage into drains, to be disposed of at the local recycling centre

VOC: Max. 140 g/l (Kat. A/i)

Rustconverter

Iso Paint Nordic A/S (Tikkurila Danmark A/S) · Tværvej 8 · 6640 Lunderskov · Denmark · © Copyright Iso Paint Nordic 2014
SUPPORT · Telefon +45 76 33 31 14 · Mail: mail.isopaint@tikkurila.com