Product
description:
StoneColor was developed using the latest nano technology,
including pigments, in a unique manufacturing process
that introduces previously unknown properties, such
as superior surface penetration, intensive adhesion,
high wearability and extra UV stability as well
as resistance to oil, water and most known chemical
products in everyday life. Additionally, StoneColor
is available in 5 standard colours and a colourless
version.
Application:
StoneColor is a specially developed product for
painting and surface treatment of coatings outdoors
on absorbent or porous surfaces made of concrete,
limestone, terracotta and clinker bricks. These
types of coatings typically exist on surfaces such
as entrance points, terraces and around swimming
pools, however, the product is also highly useful
on large public areas and surfaces, including floors
in industry halls with one of the previously mentioned
surface coatings. Following careful cleaning to
remove grease, dirt, dust, etc., StoneColor is applied
on the surface. Depending on the type of surface
and for how long dust and dirt have been building
up, use of StoneCleaner is recommended. After careful
cleaning with StoneCleaner, wash off or rinse the
surface with normal cold or tepid water. Allow the
surface to dry thoroughly for approx. 4 –
12 hours depending on the weather and ambient temperature.
Then apply StoneColor directly onto the cleaned
surface with 1 litre for each 3 – 8 square
metres depending on the application method and the
surface condition and absorbency. In case of severely
degraded or porous surfaces, priming with colourless
StoneColor is recommended, possibly adding 10 –
20% StoneColor in the desired colour to achieve
optimum priming colour. To maintain the original
appearance of the coating and only reinforce the
surface, exclusive use of colourless StoneColor
in one or
two coats depending on the desired degree of surface
protection is also possible. When treating surfaces
with StoneColor, the best results are obtained by
applying StoneColor 2 times with a break of approx.
4 hours in between. Depending on the weather conditions,
treated surfaces can be used for light passenger
traffic again after approx. 12 hours and for more
intensive vehicle traffic after minimum 24 hours.
Full penetration hardening will be realized after
approximately 5 days.
Please make a test coat of the surface
for controling the capability.
There may only be applied 1 layer Stone
Color on a surface, so be careful with the work.
Technical Data:
Application: Painting,
protection and impregnation of mineral surfaces
outdoors
Colours: Available in 5 standard
colours
Special chemistry: Based on Nano
technology using Crosslinking Resins and UV-stable
pigments
Basis: Water-based, use undiluted,
depending on the need, dilute with max. 15% water.
Properties: Strong adhesion, extreme
wearability, resistant to oil/water/chemicals/UV-stable
– for use outdoors.
Volume weight: Depending on the
type and colour from 1.05 to 1.3 kg/litre
Drying time: Approx. 60 minutes
at 20ºC and 60% RH humidity.
Application: Brush, paint roller or paint
sprayer.
Spreading capacity: 1 litre covers
approx. 3 to 8 sq.m depending on surface condition
and application method.
Cleaning: Carefully clean all
application tools in normal tepid water.
Packages: 20 litre
Storage: Dry and frost-free, out
of reach of children. |
Updated
|
